Home
 |
Level 3: Electronic Enclosure Assembly |
 |
| Installation within an enclosure of power supplies, complex cable assemblies, backplanes and thermal controls and switches. All the components are completely wired, tested and packed for transportation. | ||
|
1. project example: Portable test case |
|
The test unit is a custom test set for the aircraft industry required to meet rigid military specifications. It is supplied with documentation, bill of materials, wiring instructions and test specifications. |
||
|
2. project example: Measurement instrument 3 U |
|
a precision test and measurement instrument, designed to meet customer specifications. A unique backplane is mounted to the inner face of the rear panel with externally accessible connections. The final assembly includes a 65W power supply, wired to the backplane. The PSU is also calibrated to produce a specified output and tested to ensure correct voltages are available at specified points on the backplane The subrack has been designed to meet EMC requirements. |
||
|
3. project example: Power distribution unit 2 U |
|
supplying two - 48 VDC rails for telecoms equipment. Two DC input supplies are connected to large terminals at the rear of the unit. The -48 rail passes through a 100A Isolator and then is distributed via 25 A circuit breakers to power connectors at the rear. The PDU is part of a cabinet build which is designed to meet the EMC, UL, CE and NEBS approvals. |
||
|
Further Information |
|
| For further information please contact: integration@schroff.co.uk |