Home  Capabilities  Climate control

Application Areas Analysis of principle development construction versions in earlier phases Visualisation of basic failure modes Development analysis for optimising the construction (parameter studies) Analysis of customer specific upgrade versions Technical analysis to solve problems Project structure Identification and check of the necessary input information Agreement on the simulation target Quotation stage Order placement Construction of a simulation model Calculations and the intermediate results Analysis of the silmulation restults Simulation report, explaination and summary Example project: Basic air flow with front air intake below the cards System subrack 4 U by 500 mm deep Without corrective measures, narrow main flow and hot spot through air movement in the front area Solution via special perforated metal sheet Example project: Cabinet simulation with installed subracks model Cabinet height: 2200 mm, width: 600 mm, depth: 800 mm Temperature gradiant Air flow Example project: Subrack - simulation model with down to component level on boards board size: 6 U by 160 mm deep Example project: Air flow and surface temperatures Subrack: 10 U by 265 mm deep Optimising several areas Optimising several areas Optimising several areas Example project: View of temperature behaviour Cabinet height:2200 mm, width: 600 mm, depth: 800 mm Cabinet temperatures for solar radiation Heating effect from the installed subracks Example project: View of different operating states Subrack: 9 U by 280 mm deep Normal operation, fan speed 60% Fan failure; 1 fan 100% speed The two views are based on a different scale. Example project: Flow views of the simulation models are possible europacPRO 9 U / 84 HP / 280 mm deep; 2 radial fans on top