Schroff UK has expanded its 19in. maxpowerPRO family of switched-mode power supplies with the addition of a 6U model designed specifically for high-power CompactPCI applications.

Featuring an output of 500W, the new 13100-145 power supply operates from a wide input voltage range of 90 to 264V AC with PFC and delivers output voltages of 5V, 3.3V, 12V and -12V.

As well as incorporating a P47 connector conforming to the PICMG 2.11 CompactPCI specification, the PSU also provides the high levels of reliability demanded by typical CompactPCI applications in the communications, industrial, military and aerospace sectors.

Inputs are protected against voltage transients and high inrush currents, outputs are protected against open-circuit and short-circuit conditions, and the power supply also includes over-temperature protection.

The unit is hot-swap capable, and active current sharing is provided on three of the outputs for parallel operation of multiple units in n+1 redundant designs or in systems requiring a higher output power.

Measuring 6U high x 8HP wide x 172mm deep, the new PSU is supplied with an EMC seal and a 19in. front panel including handles. It achieves a typical efficiency of 84% and meets the requirements of the relevant standards covering safety, EMC and mechanical stress.

For further information, visit www.schroff.co.uk.

Contact details for publication:
www.schroff.co.uk
schroff.uk@pentair.com
Tel: +44 (0)1442 218726

Press inquiries to:
Keith Reynolds
Schroff UK Ltd
keith.reynolds@pentair.com
Tel: +44 (0)1442 218726

or

Rick Bauling
RJB Communications
rbauling@rjbcoms.com
Tel: +44 (0)1234 782255